Re: Front end shimmy!
Don, strange as it is I did the same front end work on my "30" town sedan including the king pins and had a shimmy at around 20mph when I hit a bump or under braking. The only thing I could find was a little looseness in the steering box so I removed it and reset all the adjustments. The problem with the box seemed to be that I didn't properly center the sector gear. That is done with the rivet that has a large screw driver slot. Its is a tedious job but very important if you replaced the worm and sector. Just follow Les Andrews instructions.
So far I haven't had any more shimmy.
|