Quote:
Originally Posted by john charlton
Many flywheel housings are cracked when someone jacks the front of the engine up with both bolts each side still in place . Remove one bolt each side and then the engine can pivot and no damage done . With a "floatamotor" setup installed the drive is through rubber donuts and the flexi front mount in my opinion not good . I would like to see how much ahead and astern movement there is in this case with the car being driven .I dont have a "gopro" camera but if I did I might try it ,just curious .
John in Suffolk County England .
|
I agree,real important that you use the front rubber FAM mount as well,else your clutch will chatter like a dog passing peach pits