[Bill Lee/Virginia]

I purchased one of the first run of Lion Heads, number 8, I think, with dual plugs. I used Charlie's solid copper head gasket. I installed the LH on an engine built by Antique Engine Rebuilding of Skokie, IL that has inserts, touring cam and bored .080 over. I use a Mallory distributor to fire either bank of plugs but have not tried both banks at once. Either bank seems to perform the same, very good. I use the 6 cyl Ford downdraft carburetor on a modified '32 intake manifold (turned upside down). The differential is 3.54 to 1. When you release the clutch and push the gas, you better have the wheels pointed in the direction you want to go because you are going there, and rather quickly I might add.
Bill Lee/Virginia Peninsula