The Ford Barn - View Single Post

deuce_roadster · 09-19-2020, 10:19 AM

To make my 40 coupe driver's side visor "stiffer" I pulled the visor straight off the rod (there is a pointed rod in that goes in the length of it) and put a slight bend in it, pushed the visor back on and it now stays where I put it. Yours may be rusty, work it back and forth and pull it off and clean the rod. As mentioned, best done off the car.

09-19-2020, 10:19 AM	#4
deuce_roadster Senior Member Join Date: Oct 2011 Location: Shelton, WA Posts: 3,800	Re: '40 Ford visors To make my 40 coupe driver's side visor "stiffer" I pulled the visor straight off the rod (there is a pointed rod in that goes in the length of it) and put a slight bend in it, pushed the visor back on and it now stays where I put it. Yours may be rusty, work it back and forth and pull it off and clean the rod. As mentioned, best done off the car.