Quote:
Originally Posted by Muttley
I'm now having problems with a new valve that was installed last Summer. The valve worked perfectly and then last week started becoming very difficult to turn on/off. I tried spraying with WD-40 and PB Blaster but it didn't seem to help at all. Any suggestions short of removing it completely and rebuilding/replacing? Besides the simple fact that it's a PITA I'm worried that it may create a leak if it has to keep going in an coming out.
|
Same thing hapend with mine...it got very difficult to turn on and off. I have the small filter screen but particles/debris must be making it through and wreking the valve.