The Ford Barn - View Single Post

Pete · 01-23-2021, 11:02 PM

If you want original type, use what you have.
If you want the best, get or make some from moly filled Delrin and fit them to a slight hand push fit in BOTH the spring and the hanger. Use shackle pins that are drilled for grease fittings. These bushings will outlast the car.

01-23-2021, 11:02 PM	#4
Pete Senior Member Join Date: May 2010 Location: Wa. Posts: 5,409	Re: 32 spring bushings If you want original type, use what you have. If you want the best, get or make some from moly filled Delrin and fit them to a slight hand push fit in BOTH the spring and the hanger. Use shackle pins that are drilled for grease fittings. These bushings will outlast the car.