The Ford Barn - View Single Post - pinpointing month date-of-assembly

Brubaker · 11-27-2020, 11:32 AM

Really didn't mean to imply determining the exact day. Wording should have been month.
Turns out to be Sept-->Dec 1930 (165-C). Likely closer to December. Going through Steve's articles (and with his help actually) turned out to be an enjoyable process. Gas tank ID; frame body bracket placement (the front moving back 2 3/8" in my case); frame body bracket additions (#6 specifically); emergency brake shaft changes, all were helpful indicators.

11-27-2020, 11:32 AM	#12
Brubaker Senior Member Join Date: May 2010 Location: Northern California Posts: 765	Re: pinpointing month date-of-assembly Really didn't mean to imply determining the exact day. Wording should have been month. Turns out to be Sept-->Dec 1930 (165-C). Likely closer to December. Going through Steve's articles (and with his help actually) turned out to be an enjoyable process. Gas tank ID; frame body bracket placement (the front moving back 2 3/8" in my case); frame body bracket additions (#6 specifically); emergency brake shaft changes, all were helpful indicators.