The Ford Barn - View Single Post

ryanheacox · 07-20-2020, 07:26 PM

I made that mistake as well. Not horrible to adjust in the car just slow going. I made up a tool to gauge and set the finger depth to 11/16". I managed to get each finger adjusted to +/-0.004" which is probably as good as can be with the transmission installed. In my case it did solve my clutch chatter.

I'll try to grab a picture of my tool tomorrow. It's very ugly but functional.

07-20-2020, 07:26 PM	#2
ryanheacox Senior Member Join Date: Apr 2013 Location: Northwest CT Posts: 1,092	Re: Pressure plate adjustment I made that mistake as well. Not horrible to adjust in the car just slow going. I made up a tool to gauge and set the finger depth to 11/16". I managed to get each finger adjusted to +/-0.004" which is probably as good as can be with the transmission installed. In my case it did solve my clutch chatter. I'll try to grab a picture of my tool tomorrow. It's very ugly but functional.