View Single Post
Old 07-14-2019, 06:33 PM   #12
Tinbasher
Senior Member
 
Tinbasher's Avatar
 
Join Date: May 2010
Location: Innisfil, Ontario Canada
Posts: 1,173
Default Re: Re-skin deck lid

Yes fold them over like original. The best thing to do is to make the inner skin fits your opening nicely. Good gap all the way around. Then when putting on the skin make sure there's no space between the inner and the outer. Once your happy with the fit fold over the flange. No not tack weld it until you've had the lid back on to make sure there's no twist in the panel. Fit the panel if needed and then remove the deck lid and make the 4 or 6 tack welds like original. My thoughts. JP
Tinbasher is offline   Reply With Quote