The Ford Barn - View Single Post

Patrick L. · 08-15-2011, 03:53 PM

You could use a center punch and prick the hub a dozen or so times.. The cup will then fit tight and center itself.. This was a common problem and fix by Ford in the 50's..

08-15-2011, 03:53 PM	#4
Patrick L. Senior Member Join Date: May 2010 Location: Largo Florida Posts: 7,225	Re: Front Outer Wheel Bearing Race Question You could use a center punch and prick the hub a dozen or so times.. The cup will then fit tight and center itself.. This was a common problem and fix by Ford in the 50's..