The Ford Barn - View Single Post

tudor87 · 05-01-2013, 11:25 PM

Thanks to all for your reply. It is a big leak due to warped axle housing. I used the original bolts but it won't seal because of the warp. I had the housing machined to true it up and a small amount of the housing was removed so I have to go thru some of the adjustments again. I may just take it al the way down and start all over again. Thanks to Carl and all of you for the help, I am going to follow Tom Endy's instruction.

05-01-2013, 11:25 PM	#8
tudor87 Member Join Date: Sep 2011 Location: Reform Alabama Posts: 60	Re: dirrerential adjustments Thanks to all for your reply. It is a big leak due to warped axle housing. I used the original bolts but it won't seal because of the warp. I had the housing machined to true it up and a small amount of the housing was removed so I have to go thru some of the adjustments again. I may just take it al the way down and start all over again. Thanks to Carl and all of you for the help, I am going to follow Tom Endy's instruction.