The Ford Barn - View Single Post

grumpys hot rods · 10-28-2020, 08:23 AM

I measured the exhaust valve lift with a dial indicator this morning.
I have .410 lift at that valve. That's a lot.
Checked flathead cam specifications and found the aftermarket cam with .400 Isky Jr
Going to try two washers this morning. Wish me luck
This is why you should check A camshaft.

10-28-2020, 08:23 AM	#8
grumpys hot rods Member Join Date: May 2010 Location: Indianapolis Posts: 91	Re: Engine Problem I measured the exhaust valve lift with a dial indicator this morning. I have .410 lift at that valve. That's a lot. Checked flathead cam specifications and found the aftermarket cam with .400 Isky Jr Going to try two washers this morning. Wish me luck This is why you should check A camshaft.