The Ford Barn - View Single Post

Veeder · 10-22-2020, 06:50 PM

If you can sit tight on the conversion I suggest you do. I'm currently working with them as the unit I installed after about 2 hours however I didn't have the plug wires they require you to use. I basically got the green light the first install to use the stock wires as a test and that may have been a bad move. I to will carry a spare dist and coil if this second rod is successful.

I'm setting up a complete second dist, conduit and wires they want and will try it.

Stay tuned but suggest temporarily setting up a distributor with points.

10-22-2020, 06:50 PM	#7
Veeder Senior Member Join Date: Dec 2012 Location: CT Posts: 394	Re: Replacing points on 39 Ford If you can sit tight on the conversion I suggest you do. I'm currently working with them as the unit I installed after about 2 hours however I didn't have the plug wires they require you to use. I basically got the green light the first install to use the stock wires as a test and that may have been a bad move. I to will carry a spare dist and coil if this second rod is successful. I'm setting up a complete second dist, conduit and wires they want and will try it. Stay tuned but suggest temporarily setting up a distributor with points.