View Single Post
Old 09-17-2020, 12:59 PM   #5
rotorwrench
Senior Member
 
rotorwrench's Avatar
 
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,367
Default Re: Skip's rebuilt coils

When a person is rewinding a coil whether it's for ignition, a horn, or a relay, they generally count the number of turns when they disassemble so they can replicate the number of turns with the proper type and gauge of wire. There can and likely will be some small variances in Ohm values.

When changing from one voltage to another is where the ohms values or number of turns may differ. Skip would be the guy to ask about his rebuilds.
rotorwrench is offline   Reply With Quote