Thread: 47 brake problems
View Single Post
Old 10-19-2015, 12:12 AM   #13
Old Henry
Senior Member
 
Old Henry's Avatar
 
Join Date: Oct 2010
Location: Orem, Utah
Posts: 5,762
Default Re: 47 brake problems
Quote:
Originally Posted by Lanny View Post
I put a Wagner rebuilt Single Pot master cyl in a '64 Comet a few years
ago, and the instructions said to bench bleed it before installing in vehicle,
was Wagner wrong

.
That is the same instructions that came with the master cylinder I bought from NAPA for my 47.

Here is one bench bleeding procedure: http://s7d9.scene7.com/is/content/Ge...29488pdf?$PDF$

Here are the installation instructions for my 47 MC that includes the bench bleeding procedure: http://s7d9.scene7.com/is/content/Ge...62928pdf?$PDF$
__________________
Prof. Henry (The Roaming Gnome)
"It is good to have an end to journey toward; but it is the journey that matters, in the end.” *Ursula K. Le Guin in The Left Hand of Darkness
Last edited by Old Henry; 10-19-2015 at 12:21 AM.
Old Henry is offline   Reply With Quote