The Ford Barn - View Single Post

Russ/40 · 07-29-2021, 05:18 PM

They are both wrong. The angle pieces coming up to join, are for the front motor mount.
The flywheel housing is backwards. The small hole in the housing is against the block.

07-29-2021, 05:18 PM	#3
Russ/40 Senior Member Join Date: May 2010 Location: Santee, California Posts: 3,505	Re: Engine Stand They are both wrong. The angle pieces coming up to join, are for the front motor mount. The flywheel housing is backwards. The small hole in the housing is against the block.