Quote:
Originally Posted by deuce5wndw
A 1947 cross reference I have says the RA-135 Bower is the same as B7118 along with 99026 Hyatt, the B7121 is RA-136 Bower and 99028 Hyatt. Us V8 guys are having the same problem! I'm putting together two transmissions and using nice used bearings even though it goes against everything I learned over the years! Hope this helps, Dale.
|
JKY, I am going with the Bower bearings listed above by deuce5wndw. I am familiar with the Bower Bearings, I have used them when I rebuilt several
8" & 9" rear ends. They have always been quality bearings.
Thanks, John
Hope they have not moved off shore!!