The Ford Barn - View Single Post

JSeery · 11-03-2020, 04:57 PM

Be very careful with the pistons, it is easy to crack a cylinder wall. Need to start by drill out as much of the center of the piston as possible.

11-03-2020, 04:57 PM	#3
JSeery Member Emeritus Join Date: Nov 2012 Location: Wichita KS Posts: 16,132	Re: Stuck block two questions Be very careful with the pistons, it is easy to crack a cylinder wall. Need to start by drill out as much of the center of the piston as possible.