Re: Borg warner OD help
It's been a number of years since I worked on any of these but I recall using a 6 to 10 spline coupler. I know when we were scrounging through the wrecking yards (it became a club project) for BW units we had to make sure we got the ones with the splined shaft we could use the 6 to 10 on. I don't recall finding any coupler with more than the 10 on one end. This was in the mid 80's long before the Mitchell was available.
Last edited by foxfire42; 09-12-2016 at 11:32 PM.
|