The Ford Barn - View Single Post

Pete from OZ · 10-31-2015, 02:57 PM

Hi Fellas,
I am about to fit up the front sheet metal on my 35 Coupe, and have a couple of questions on which would be the best way to start.
Also this is a early 35 with the long fender braces.

1 - Would it be best to fit the inner fenders and grille first to the chassis, then fit the fenders.
2 - Or would it be better to attach the inner fenders to the fenders and then fit to the chassis, followed by the grille.

Radiator is already fitted

Thanks. - Pete from OZ

10-31-2015, 02:57 PM	#1
Pete from OZ Member Join Date: Jun 2011 Location: Sydney - Australia Posts: 87	1935 Front Sheet metal Fitment Hi Fellas, I am about to fit up the front sheet metal on my 35 Coupe, and have a couple of questions on which would be the best way to start. Also this is a early 35 with the long fender braces. 1 - Would it be best to fit the inner fenders and grille first to the chassis, then fit the fenders. 2 - Or would it be better to attach the inner fenders to the fenders and then fit to the chassis, followed by the grille. Radiator is already fitted Thanks. - Pete from OZ