Re: PCV For ARDUN
Heres how I did my PCV installation it screws into the home made valley cover follow down the copper tubing to see it. Also located off the copper tubing is the engine vacuum gauge. Everything else for the Large SCOT blower assembly is also home made your typical back yard Hot Rod project. As I wrote previously Tom there's no difference between the 59A or 8BA when it comes to venting the crankcase in our applications.
Ronnieroadster
__________________
I use the F word a lot no not that word these words Flathead , Focus and Finish.
"Life Member of the Bonneville 200 MPH Club using a Ford Flathead block"
Owner , Builder, Driver of the First Ford Flathead bodied roadster to run 200 MPH Record July 13, 2018 LTA timing association 200.921 in one and a half miles burning gasoline.
First ever gas burning Ford flathead powered roadster to run 200 MPH at Bonneville Salt Flats setting the record August 7th 2021 at 205.744 MPH
|