The Ford Barn - View Single Post

Seth Swoboda · 10-13-2020, 03:29 PM

Thanks for all the advise fellas. This was all very helpful. I was away from the computer for a while. I'll probably sit tight for now. I do want to build a 351W for this car and I'll keep researching the most sensible combination of engine/transmission/rear gear ratio for that.

Have any of you built a 351w with the Edelbrock 2092 top end kit? Thoughts?

10-13-2020, 03:29 PM	#15
Seth Swoboda Senior Member Join Date: May 2010 Location: Southern Illinois Posts: 3,788	Re: 1967 Mustang rear end gear ratio Thanks for all the advise fellas. This was all very helpful. I was away from the computer for a while. I'll probably sit tight for now. I do want to build a 351W for this car and I'll keep researching the most sensible combination of engine/transmission/rear gear ratio for that. Have any of you built a 351w with the Edelbrock 2092 top end kit? Thoughts?