The Ford Barn - View Single Post

barrelnose · 07-23-2019, 08:23 PM

Just pull your distributor and with some fine nose pliers,pull the intermediate shaft.
Your distributor drive has a tang (offset)with a sleeve pinned over it to index the shaft and the shaft has a slot(offset) at each end .
You will see what’s worn straight away.

07-23-2019, 08:23 PM	#11
barrelnose Member Join Date: Jul 2010 Location: Perth Hills Western Australia Posts: 58	Re: Rotation play in distributor shaft Just pull your distributor and with some fine nose pliers,pull the intermediate shaft. Your distributor drive has a tang (offset)with a sleeve pinned over it to index the shaft and the shaft has a slot(offset) at each end . You will see what’s worn straight away.