The Ford Barn - View Single Post

Conaway2 · 07-07-2020, 05:32 PM

I’m about t pull the rear axle to find out. I already know that I need to have the bearing surface on the housing turned down and sleeved, and one axle has a large chip broken off at the keyway. The rear wheel bearings on the car now came from Bratton’s about 30 years ago and may be OK to re-use.

07-07-2020, 05:32 PM	#5
Conaway2 Senior Member Join Date: Apr 2019 Location: Mt. Pleasant, SC Posts: 601	Re: Rear wheel bearing question I’m about t pull the rear axle to find out. I already know that I need to have the bearing surface on the housing turned down and sleeved, and one axle has a large chip broken off at the keyway. The rear wheel bearings on the car now came from Bratton’s about 30 years ago and may be OK to re-use.