View Single Post
Old 05-19-2014, 07:15 PM   #12
Senior Member
36tudordeluxe's Avatar
Join Date: Feb 2012
Location: Las Vegas, NV
Posts: 1,260
Default Re: Old problem revisited, rough running 8BA

Originally Posted by George/Maine View Post
Make sure you have the correct coil and resister for 12 volts.
Then wire direct to resister wired to coil.
if it runs good your problem is all the mickey mouse wiring.
Have 12.6V at the battery and only 9.7V at the coil with no resistor, that can't be good!? Bubba also supplied correct resistor but said only to use it if coil overheats.
36tudordeluxe is offline   Reply With Quote