View Single Post
Old 10-18-2020, 09:44 PM   #48
51 MERC-CT
Senior Member
 
51 MERC-CT's Avatar
 
Join Date: May 2010
Location: East Hartford, Ct
Posts: 5,173
Default Re: Autolite Spark Users Only

Quote:
Originally Posted by Phil Gillespie View Post
with this unit is it easy to swap between vehicles?
Would like to be able to check a couple of flathead setups with this.
Thanks
Phil NZ
From what I could determine about the unit it sells for about $250 and does not come with the sensor or the weld in bung.
It does not even have a digital readout.

There are more suitable units that come with all the components and can be used on other vehicles.
They need 12 volts to operate but for setup purposes on a 6 volt system a stand alone 12 volt battery can be used.
This is an example of what is available (and the one I am using)----------


https://www.ebay.com/itm/Innovate-39...8AAOSwsXFZJTf0
__________________
DON'T RECALL DOING SOMETHING FOR MYSELF BASED ON SOMEONE ELSE'S LIKES OR DISLIKES
51 MERC-CT is offline   Reply With Quote