View Single Post
Old 08-15-2020, 04:44 PM   #9
1crosscut
Senior Member
 
1crosscut's Avatar
 
Join Date: Feb 2011
Location: Lincoln, Nebraska
Posts: 1,506
Default Re: measure gap between rotor and plug posts in distributor cap

As in post #5 bend the brass tab on the rotor to adjust the gap. However to get the gap to the right distance you may have one or two that after bending the tab the gap is too small. On those I use a small file and take some off the posts on the distributor body.
__________________
Dave

It'll feel better when it quits hurting.
1crosscut is offline   Reply With Quote