Re: Pressure plate finger adj
Chart for pressure plate:
Clutch diameter Gauge Thickness Lever Height
9" clutch .340" 11/16" from top of plate
10" clutch .295" 15/16" from top of plate
11" clutch .365" 7/8" from top of plate
To measure place a straight edge across the top of the pressure plate and measure from the bottom of the straight edge to the top of the finger. The pressure plate should be installed on a flywheel with the spacer taking the place of the disc. A new or used disc should not be used instead of the spacer because it may not be uniform in thickness.
__________________
TomO
|