View Single Post
Old 07-09-2020, 01:47 AM   #8
flatheadmurre
Senior Member
 
flatheadmurre's Avatar
 
Join Date: Apr 2015
Location: Sweden
Posts: 3,045
Default Re: Pressure plate finger adj

To adjust them correctly you bolt them to a flat surface with a steel shim the thickness of you clutchdisc.
Then measure from the bottom surface and up to fingers.
The older ones with adjustment bolts are a walk in the park compared to the new ones you have to shim under the attachment bolts...
flatheadmurre is offline   Reply With Quote