The Ford Barn - View Single Post

Herb Concord Ca · 09-25-2020, 01:57 PM

I have had a Laycock overdrive on 2 6 Volt cars, It worked fine on both. To check the solenoid operation, run a jumper wire (16 or 14 gauge) from battery to solenoid terminal, should hear a click. Make sure the other solenoid terminal is connected to ground.

09-25-2020, 01:57 PM	#4
Herb Concord Ca Senior Member Join Date: May 2010 Location: Concord CA Posts: 635	Re: 6v t0 12 v I have had a Laycock overdrive on 2 6 Volt cars, It worked fine on both. To check the solenoid operation, run a jumper wire (16 or 14 gauge) from battery to solenoid terminal, should hear a click. Make sure the other solenoid terminal is connected to ground.