The Ford Barn - View Single Post

David R. · 07-07-2020, 05:30 PM

The holes in my AA axle aren’t tapered but the pins are. They wedge against the flat on the king pin. I measured the holes with an inside caliper because I thought they would be tapered but they aren’t.

07-07-2020, 05:30 PM	#8
David R. Senior Member Join Date: Aug 2016 Location: West Virginia Posts: 430	Re: King Pin Retaining Bolts The holes in my AA axle aren’t tapered but the pins are. They wedge against the flat on the king pin. I measured the holes with an inside caliper because I thought they would be tapered but they aren’t.