Quote:
Originally Posted by larrys40
make sure you have a u-joint gasket kit.... and your U-joint is good... and of course if your rear axle needs rebuilding at the same time that it is done. If it is good then great. I would never put a Mitchell in a rear axle that has NOT been rebuilt properly.
Of course brakes should also be paramount and up to snuff. Other than that Mitchell supplies everything for the conversion in their package. They have it honed down well and I can promise you will be pleased. It makes it a new car ( or truck).
Larry Shepard
|
I recently installed a Mitchell Overdrive. The universal Gasket set and gasket for pinion end came in the box with my overdrive. You don't get the actual universal joint.