Re: Throttle return spring replacement
It must be there...it might have been peened over and would be hard to see. If it's peened you may have to file the end a bit then drive it out with a punch.
Keep track of the orientation of the arms for reassembly....
Go to http://www.fordgarage.com and search throttle linkage...you will find pictures...I can't copy/paste with this laptop...
__________________
Early '29 CCPU that had a 4-speed, but not any more.......in the family since '62
Last edited by 1955cj5; 12-16-2017 at 11:17 PM.
|