The Ford Barn - View Single Post - Zenith

redmodelt · 06-06-2021, 08:46 AM

That link shows the instructions not the carb being talked about and did not see small type at bottom where it came from and line that I quote. Does your carb have the adjustable jet on the bottom (like the Tillotson)? "Set main jet adjusting needle at 4 1/2 full turns open." While not stock, it was an aftermarket item and could explain a lot. If so maybe change back to non adjustable jet and see if that helps.

06-06-2021, 08:46 AM	#10
redmodelt Senior Member Join Date: May 2010 Location: Portland OR Posts: 6,342	Re: Zenith - 1 Carburetor That link shows the instructions not the carb being talked about and did not see small type at bottom where it came from and line that I quote. Does your carb have the adjustable jet on the bottom (like the Tillotson)? "Set main jet adjusting needle at 4 1/2 full turns open." While not stock, it was an aftermarket item and could explain a lot. If so maybe change back to non adjustable jet and see if that helps. __________________ I know the voices aren't real but damn they have some good ideas! Last edited by redmodelt; 06-06-2021 at 08:53 AM.