Re: Rear water pump grease fitting
When you unscrew the cap you expose the grease fitting. On mine it is a Model A fitting, so you need that small grease gun or you can adapt another gun you may have for sure. You can remove the fitting and Napa should be able to fit you up with the adapter.
There is a "special" water pump grease. I think I got mine from Snyders Antique Auto. They have a website.
I eventually upgraded to a leakless water pump to improve the cars reliability. However, the seal/bearing with the "cap" is still there and you have to give it a shot of grease every 500 miles. I think I purchased my leakless pump from Snyders too.
I hope this helps
|