The Ford Barn - View Single Post

tubman · 08-07-2018, 05:40 PM

I agree with Ron about this. I spent a lot of time getting .050 clearance on my last two engines. They both run very well and are "crisper" than those I built previously. It is well worth the effort.

08-07-2018, 05:40 PM	#2
tubman Senior Member Join Date: Dec 2013 Location: Minnesota, Florida Keys Posts: 10,320	Re: Piston to head clearancing I agree with Ron about this. I spent a lot of time getting .050 clearance on my last two engines. They both run very well and are "crisper" than those I built previously. It is well worth the effort.