Sponsored Links (Register now to hide all advertisements)
Quote:
Originally Posted by nkaminar
Regarding the horn, there are usually two male bullet ends on the wires that are shoved into two brass clips. If your uncle hard wired the horn, I am not sure what that means. Take the rear cover off and see if the original brass clips are still there. (It does not matter which bullet end goes in which clip.) Your new wiring harness should have the two bullet ends on the wires for the horn.
|
This! Thank you. That’s what I was wanting to hear. Based on this I took the cover off and found there are brass clips left and it looks like my uncle just kept the ends with the bullets on them and spliced it into the wires he used.
My new harness has the bullet connectors on the end of course so I’m al set with the horn. THANK YOU!