View Single Post
Old 06-17-2021, 09:08 AM   #31
CatMan1
Senior Member
 
Join Date: Jun 2021
Location: Pella, IA
Posts: 337
Default Re: I'm not a Model A person

Quote:
Originally Posted by Slowmotoring View Post
I had a similar issue with mine when i first got it. I found that the screen inside of the gas tank was plugged with scale/rust. I ended up removing the gas line from the carburetor and blowing air back into the tank to get the junk pushed off of the screen. It hasnt had that issue since. If you try this, make sure you remove your gas cap and go easy with the air. Im not sure if this will be your fix but it worked for me. Id say its worth a try.

Reminds me of the 1967 'Bonnie & Clyde' movie. "Dirt in the fuel line. Just blowed her away." I had this same thing with my 1955 Chevy truck some 30 years ago. The dealer worked on it and claimed it was a bad fuel pump. They replaced it and said they drove it for miles after that. Nope. It would idle just fine, but when I gave it the gas it would flat out stall. I did just what you are saying and it fixed it. I put a sock over the inlet and it was fine. They didn't give us our money back for the miss diagnosis, though.
CatMan1 is offline   Reply With Quote