04-23-2016, 09:14 AM
|
#8
|
BANNED
Join Date: May 2010
Location: Michigan / Ontario border, Sarnia, Ontario. 50 miles from Detroit and 150 from Toronto.
Posts: 5,800
|
Re: Fuse in headlight harness
Quote:
Originally Posted by Jim/TX/GA
Those open style fuse holders with the spring clips are notorious for eventually having a poor connection and causing electrical problems.
As mentioned above, much better off to use a sealed, weatherproof inline fuse in the wire that feeds the headlight switch off of the generator. Hiding in the frame rail seems smart. If you have a short (repro brake light switch on a '28'/29 is common problem) it will kill the lights but not the ignition.
|
What Jim says makes a lot of sense. Wayne
|
|
|