The Ford Barn - View Single Post

Rowdy · 07-08-2013, 07:18 PM

I got lucky and found one is a large pile of parts I bought several years ago. I noticed early on Gemmer/ Ford was heavy handed in machining the early boxes often completely removing the PAT PEND, PAT PDG or PATENTED or altleast damaging the raised letters. Seems when they went to stamping them this was much less of a problem. Thanks to 700rpm I will soon have an undamaged box with readable PAT PDG on it to go with my origina 29l tube. Rod

07-08-2013, 07:18 PM	#10
Rowdy BANNED Join Date: May 2010 Location: Gothenburg Nebraska Just off I-80 Posts: 4,893	Re: 7 Tooth vs. 2 Tooth I got lucky and found one is a large pile of parts I bought several years ago. I noticed early on Gemmer/ Ford was heavy handed in machining the early boxes often completely removing the PAT PEND, PAT PDG or PATENTED or altleast damaging the raised letters. Seems when they went to stamping them this was much less of a problem. Thanks to 700rpm I will soon have an undamaged box with readable PAT PDG on it to go with my origina 29l tube. Rod __________________ Do the RIGHT thing - Support the H.A.M.B. Alliance!!!!