Quote:
Originally Posted by marko39
This fan is 15 3/4 diameter which is another clue to it being incorrect. Sorry, can't post photo .
|
Marko,
Here's a photo of a proper 85/95 hp '39 Deluxe / '40 (all) cooling fan.
If you had simply measured across two opposing blades, you'd come up with something near 15 3/4".
The hub to mating surface distance is in fact 3 3/4" for the Ford.
Be careful when using a parts book to determine absolute correctness. One must always remember that the parts listed are service parts that will fit and function but not necessarily be correct.