The Ford Barn - View Single Post - Interest in new restoration project thread?

TJ · 02-06-2020, 04:21 PM

I used the EMS pan on a '37 and it is a good starting point. It does take some maneuvering to get it to fit. The lip for the rubber seal is definitely too wide and will need trimming. Unless they have changed, they do not put the bumper iron cutouts in the pan. I'm not sure, but I thought that McPherson College in Kansas was making some panels for '37 in their restoration shop.

02-06-2020, 04:21 PM	#196
TJ Senior Member Join Date: May 2010 Location: Napa,California Posts: 6,037	Re: Interest in new restoration project thread? I used the EMS pan on a '37 and it is a good starting point. It does take some maneuvering to get it to fit. The lip for the rubber seal is definitely too wide and will need trimming. Unless they have changed, they do not put the bumper iron cutouts in the pan. I'm not sure, but I thought that McPherson College in Kansas was making some panels for '37 in their restoration shop.