The Ford Barn - View Single Post - 32-34 distributor rotor gap

Porfrm · 04-29-2020, 10:36 PM

The truck sat for 35 years and I got it running and even a short drive. Have a new inner terminal cap as one was broke. That is what I measured. Motor sounded good when running. Have the motor and transmission removed now as the more I cleaned the further I went. Am down to bare chassis. This would be great time for distributor repairs as it is easy to get to. But may be I should put on new inner caps and leave well enough alone. The rotor does have slight wear slack, not bad. This is a 1 1/2 ton truck so am not gonna be taking long hauls!

04-29-2020, 10:36 PM	#8
Porfrm Junior Member Join Date: Jan 2020 Location: Southwest Kansas Posts: 13	Re: 32-34 distributor rotor gap The truck sat for 35 years and I got it running and even a short drive. Have a new inner terminal cap as one was broke. That is what I measured. Motor sounded good when running. Have the motor and transmission removed now as the more I cleaned the further I went. Am down to bare chassis. This would be great time for distributor repairs as it is easy to get to. But may be I should put on new inner caps and leave well enough alone. The rotor does have slight wear slack, not bad. This is a 1 1/2 ton truck so am not gonna be taking long hauls!