The Ford Barn - View Single Post

john charlton · 10-06-2019, 03:52 PM

Thank you very much Purdy all duly noted. The engine is on a stand and I have removed the shim .The crank still turns freely and I will "plastigage" to see the clearance and adjust to suit using what you have advised .I will do the centre and front as well .I have blown through the cap tube and it is clear no resistance .

John in same place same weather .

10-06-2019, 03:52 PM	#3
john charlton Senior Member Join Date: May 2010 Posts: 1,304	Re: Rear main cap question Thank you very much Purdy all duly noted. The engine is on a stand and I have removed the shim .The crank still turns freely and I will "plastigage" to see the clearance and adjust to suit using what you have advised .I will do the centre and front as well .I have blown through the cap tube and it is clear no resistance . John in same place same weather .