View Single Post
Old 01-26-2020, 10:17 PM   #13
Tom Wesenberg
Senior Member
 
Tom Wesenberg's Avatar
 
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
Default Re: Brake Light Switch Backwards

With no pull on the switch rod, the switch should be spring loaded to be OPEN. If it isn't, then remove the cover and see if the contacts are mounted incorrectly. I've seen it happen on the 28-9 switch, and possible because someone messed with it and assembled it wrong.
Tom Wesenberg is offline   Reply With Quote