The Ford Barn - View Single Post

jmerson · 11-03-2013, 05:13 PM

Thanks for the reply,

I've seen that quite a few times but it's too vague for me. The wire going to the cutout could be going to ground. It also shows one coil going to ground which I don't think is correct, at least from what I've read. One is supposed to go to the 1st brush and the other is supposed to go to the 3rd brush. The 2nd set of brushes are supposed to be grounded.

Jim

11-03-2013, 05:13 PM	#3
jmerson Member Join Date: Mar 2012 Location: Waterloo,CA Posts: 50	Re: 1930 field coil wiring Thanks for the reply, I've seen that quite a few times but it's too vague for me. The wire going to the cutout could be going to ground. It also shows one coil going to ground which I don't think is correct, at least from what I've read. One is supposed to go to the 1st brush and the other is supposed to go to the 3rd brush. The 2nd set of brushes are supposed to be grounded. Jim