The Ford Barn - View Single Post

glennpm · 08-09-2019, 04:02 PM

Hi Jim,

If the fluid ran over the top, it may be a lighter density than required by these gauges. I wrote some stuff here and BTW my gauge when full will only get to a little over the 3/4 mark. I have two 1/16" calibration rods in it.

https://www.fordbarn.com/forum/showt...ed+gauge+fluid

Glenn

08-09-2019, 04:02 PM	#8
glennpm Senior Member Join Date: Sep 2014 Location: Wiscasset, Maine Posts: 1,981	Re: hooking up a 32 gas gauge.... Hi Jim, If the fluid ran over the top, it may be a lighter density than required by these gauges. I wrote some stuff here and BTW my gauge when full will only get to a little over the 3/4 mark. I have two 1/16" calibration rods in it. https://www.fordbarn.com/forum/showt...ed+gauge+fluid Glenn