The Ford Barn - View Single Post

Terry,OH · 09-11-2018, 06:32 AM

Tank empty, gauge in the dash, with hydrostatic line disconnected, fill gauge till gauge reads exactly "Empty" then connect hydrostatic tube and put gas in tank. You may have to drive a little bit, it will read correctly if there are no leaks and the lines are clear.

09-11-2018, 06:32 AM	#2
Terry,OH Senior Member Join Date: May 2010 Posts: 4,751	Re: hooking up a 32 gas gauge.... Tank empty, gauge in the dash, with hydrostatic line disconnected, fill gauge till gauge reads exactly "Empty" then connect hydrostatic tube and put gas in tank. You may have to drive a little bit, it will read correctly if there are no leaks and the lines are clear.