Thread
:
rocker arm oiling problems on Y block
View Single Post
10-04-2021, 07:26 PM
#
28
Dobie Gillis
Senior Member
Join Date: May 2012
Location: Middle TN
Posts: 1,060
Re: rocker arm oiling problems on Y block
My 292 runs at about 40 PSI warm regardless of RPM. It starts cold at 50 PSI and drops to 40 as it warms up. I use a mechanical gauge.
__________________
Often wrong but never in doubt.
Dobie Gillis
View Public Profile
Send a private message to Dobie Gillis
Find More Posts by Dobie Gillis