The Ford Barn - View Single Post

Mulletwagon · 12-01-2019, 01:17 PM

Saga continues. Checked the run out on the housing and flywheel and they dialed out to .004 and .003. The pilot and throw out bearings look new. The HD and standard Discs look very different. The HD has very large springs and many rivets hold the friction material to the backing. The friction band on the standard is also about .125 inch wider. Waiting on trans parts. Still cannot explain the chatter.

12-01-2019, 01:17 PM	#4
Mulletwagon Senior Member Join Date: Jan 2019 Location: Florida Panhandle Posts: 585	Re: Standard vs HD Clutch Disc Saga continues. Checked the run out on the housing and flywheel and they dialed out to .004 and .003. The pilot and throw out bearings look new. The HD and standard Discs look very different. The HD has very large springs and many rivets hold the friction material to the backing. The friction band on the standard is also about .125 inch wider. Waiting on trans parts. Still cannot explain the chatter.